Send SMS
Send E-mail

Testing Machines

Our product range includes a wide range of constant temperature and humidity test chamber, mobile phone controlled drop test machine, mobile phone roller drop test machine and vibration test bench.
Get CALLBACK

Constant Temperature and Humidity Test Chamber

Constant Temperature and Humidity Test Chamber
 
Get Best Quote
Approx. Rs 1.6 Lakh / SetGet Latest Price

Product Details:
Minimum Order Quantity1 Set
BrandDeltaLogic
Automation GradeAutomatic
Voltage220v
Power SupplyAC 1 Phase
Power SourceAC
SizeW920*H1360*D970MM (width * height * depth)
Phase1 phase
I Deal InNew Only

This equipment is suitable for all kinds of automotive parts, electrical and electronic products and other products, parts and materials for high and low temperature constant and gradual change, mutation, alternating, damp heat test and other environmental simulation reliability test.                                                                     Parameters:                                     
1. Effective volume:100L
2. Inner box size :W500*H500*D400MM (width * height * depth)
3. Outer box size :W920*H1360*D970MM (width * height * depth)                                                       
4.Ambient temperature :5~30°C
5.Ambient :humidity 10%~85%RH
6.Temperature range :-40°C~+150°C (adjustable control accuracy ±0.1°C)                                                            
7 equipment weight: 300KG
8 equipment power :5.0KW (220V)

Additional Information:
  • Delivery Time: 2 Weeks
Yes! I am Interested
Get CALLBACK

Mobile Phone Controlled Drop Test Machine

Mobile Phone Controlled Drop Test Machine
 
Get Best Quote
Approx. Rs 2.1 Lakh / SetGet Latest Price

Product Details:
Minimum Order Quantity1 Set
Packaging TypeWooden Box
Display TypeDigital
BrandDeltaLogic
Weight200kg
SupplyAC
Voltage220v
Frequency50hz
Phase1 phase
I Deal InNew Only
Sizewidth 680 x length 1000 x height 2500mm

The device can fix a small and lightweight product such as a mobile phone in a certain posture and drop from any height to test the impact resistance of the product. Meet the YD/T1539-2006 standard. The test sample is not packaged, and the matched battery is installed. It is placed at a height of (1.0±0.01)m and is free to fall on the surface of the marble. The visible area of ​​the display is not less than 40% or 25cm2 of the front surface area of ​​the casing. The mobile phone should be able to fall freely on the marble surface at a height of (0.5 ± 0.005) m, each face falling twice, 6 sides totaling 12 times, except for the surface scratches, small pits, function, appearance and The assembly shall comply with the requirements of the relevant standards.
Technical parameters:
1. Maximum weight of test article: 2kg
2, drop height range: 300mm ~ 2000mm
3, drop height setting: ruler and set pointer / digital display
4. Drop mode: the fixture falls with the sample.
5. The test piece is pneumatically clamped.
6, test machine installation area: width 1000 × length 680mm
7, test machine size: width 680 × length 1000 × height 2500mm
8, test machine weight: about 200kg
9, power: 1 ∮, AC220V, 0.5kw
The device can fix a small and lightweight product such as a mobile phone in a certain posture and drop from any height to test the impact resistance of the product. Meet the YD/T1539-2006 standard. The test sample is not packaged, and the matched battery is installed. It is placed at a height of (1.0±0.01)m and is free to fall on the surface of the marble. The visible area of ​​the display is not less than 40% or 25cm2 of the front surface area of ​​the casing. The mobile phone should be able to fall freely on the marble surface at a height of (0.5 ± 0.005) m, each face falling twice, 6 sides totaling 12 times, except for the surface scratches, small pits, function, appearance and The assembly shall comply with the requirements of the relevant standards.
Technical parameters:
1. Maximum weight of test article: 2kg
2, drop height range: 300mm ~ 2000mm
3, drop height setting: ruler and set pointer / digital display
4. Drop mode: the fixture falls with the sample.
5. The test piece is pneumatically clamped.
6, test machine installation area: width 1000 × length 680mm
7, test machine size: width 680 × length 1000 × height 2500mm
8, test machine weight: about 200kg
9, power: 1 ∮, AC220V, 0.5kw

Additional Information:
  • Delivery Time: 2 Weeks
Yes! I am Interested
Get CALLBACK

Mobile Phone Roller Drop Test Machine

Mobile Phone Roller Drop Test Machine
 
Get Best Quote
Approx. Rs 1.2 Lakh / SetGet Latest Price

Product Details:
Minimum Order Quantity1 Set
ColorWhite
Packaging TypeWooden Box
Display TypeDigital
Weight200kg
SupplyAC
Power1 phase ac 220v
Voltage220v
Frequency50hz
Phase1 phase
I Deal InNew Only
Size1050X1100X1120 (mm)

This machine is suitable for the tumbling and dropping test of mobile phones and other similar products. It has the function of 6-digit display count, and 2 test chambers can test 2 samples at the same time.
Applicable to mobile phones, PDAs, electronic dictionaries, CDs, MP3s, and other small and lightweight portable electronic products, as well as connectors, remote controls, etc. for continuous rotation (drop) test, after the specified number of arrivals, the damage caused by the investigation situation.
The test equipment meets the national standard GB/T 2423.8-1995 or IEC 60068-2-32, Ed2 test conditions; the drum manufacturing process meets the GB/T2423.8-1995 Appendix A standard.
Technical parameters
1. Test speed: 5 to 20 times / minute (can be set);
2. Roller test height: 0.5m and 1m;
3. Number of drum test chambers: 2;
4. Count: 6-digit display counter (1 to 999999)
5. Maximum weight of test article: 5kg
6. Power: 1∮, AC220V
7. Dimensions: 1050X1100X1120 (mm)
8. Weight: (about) 200kg

Additional Information:
  • Delivery Time: 2 Weeks
Yes! I am Interested
Get CALLBACK

Vibration Test Bench

Vibration Test Bench
 
Get Best Quote
Approx. Rs 85,000 / SetGet Latest Price

Product Details:
Minimum Order Quantity1 Set
Voltage220v
Power1 phase 220v
Frequency220V 50Hz
Weight40kg approx
Model Name/NumberDT-2002
Warranty1

This equipment is mainly used to test the strength performance test of products. It is mainly used in the defense, aerospace, aviation, communication, electronics, automobile and motorcycle, home appliance industry products under the artificial simulation of the strength performance test conditions, the physical and other related products. The performance is tested. After the test, the performance of the product can be judged by the verification to meet the requirements for the design, improvement, verification and factory inspection of the product.
Main parameters:                                                                                                                   Model GP-2002
Maximum test load 60 Kg
Frequency range (Hz) 5~200 (adjustable)
Sweep range (Hz) 5~200 (adjustable)
No-load amplitude value (mm) 0~5
Vibration direction vertical
Maximum acceleration 0~20g (adjustable)
Set time range (S) 1~350000
Vibration waveform Sine wave / half sine wave
Work surface size 500*500*46
Voltage 220V 50Hz
Power consumption 1.8KW
Cooling method
Fixture Replaceable

Additional Information:
  • Delivery Time: 2 Weeks
Yes! I am Interested
Explore More Products
X
Find Us Tapas Ranjan (CEO) B 1, Sector 60, Gautam Buddha Nagar, Noida - 201301, Uttar Pradesh, India
SEND SMS
SEND E-MAIL
Share Us: